-,

Home - Products - Press (Mechanical, Hydraulic, Pneumatic Punch) - J23 Series Open Tilting Press

Guangdong Yiforging Machine Tool Co., Ltd

contact number:

137 0255 2178 Mr.Hu

Add: 12A-14A, Building 15, Shunlian International Machinery City, Chencun Town, Shunde District, Foshan City, Guangdong Province

J23 Series Open Tilting Press

Technical Information

冲床J23-80吨

The performance characteristics of the J23 series open tilting press:

1. This series of presses adopts a rigid rotary key clutch, which has a simple structure, convenient operation and maintenance, and adopts helical gear transmission, ensuring smooth operation; The J23-25 open tilting press has low impact and low noise. It is a domestic company that changed the sliding bearing (i.e. copper tile) of the transmission gear to a rolling bearing. After the change, the transmission gear is wear-resistant, avoiding the increase in gear noise caused by rapid wear of the copper tile.

The J23-35 open type tilting press is unique in the industry. The body of the 35T press produced by other domestic manufacturers is basically the same as that of the 25T press, and the transmission gear is made of copper tiles. Only by redesigning the body, the 35T body is much heavier than the 25T body (with good body strength), and adopts rolling bearing transmission (with low gear noise), which is equivalent to a lightweight 40T press in the general sense.

3. Pressure machines with a tonnage of 80T and above all adopt a pneumatic double balance cylinder structure, which has small fluctuations in balance force and balances the weight of the slider and upper mold, avoiding machine tool shaking caused by the above weight. It can prevent the impact and noise caused by reverse force on the gears during transmission, eliminate the gap between the connecting rod and the slider, and reduce the impact and wear of the stressed parts; It can prevent accidents caused by the sliding block falling when the brake fails or the connecting rod is broken.

冲床J23-80吨

技术参数			单位Unit	J23-6.3	J23-10	J23-16	J23-25	J23-35	J23-40	J23-63	JB23-63	J23-80	J23-100	J23-125
滑块公称压力			KN	63	100	160	250	350	400	630	630	800	1000	1250
公称力行程			mm	2	2	2	2.5	3.5	6	6	7	7	7	8
滑块行程			mm	35	45	55	65	80	90	110	110	120	140	150
行程次数快速			times/min	170	145	125
行程次数低速			times/min				55	50	45	50	40	38	38	38
封闭高度			mm	150	180	220	270	290	320	360	390	440	480	500
封闭高度调剂量			mm	30	35	45	55	60	65	80	80	90	100	100
滑块中心线至机距离			mm	110	130	160	200	220	250	260	310	350	380	390
立柱距离			mm	150	180	220	270	280	340	350	420	450	560	550
滑块底面尺寸	左右L×R		mm	140	170	200	250	250	300	300	400	430	540	540
滑块底面尺寸	前后F×B		mm	120	150	180	220	220	260	260	360	360	480	480
模柄孔尺寸	直径		mm	30	30	40	40	40	50	50	50	60	60	60
模柄孔尺寸	深度		mm	55	55	60	60	60	70	70	70	75	75	75
工作台尺寸	左右L×R		mm	310	370	450	560	610	700	760	860	950	1080	1100
工作台尺寸	前后F×B		mm	200	240	300	370	400	460	480	570	650	710	720
落料孔直径			mm	60	80	100	120	120	150	150	180	200	220	180
工作台板厚度			mm	30	35	40	50	60	65	80	80	100	120	130
Z大倾斜角度				45	35	35	30	30	30	20	20	20	15	13
工作台离地面距离			mm	750	730	750	800	815	850	810	850	850	850	860
外形尺寸		左右L×R	mm	780	900	1150	1345	1460	1721	1810	1958	2060	2404	2504
		前后F×B	mm	620	665	847	950	1058	1335	1350	1500	1715	1790	1790
		高	mm	1503	1658	1910	2130	2225	2488	2740	2868	3290	3625	3715
地脚螺拴距离		左右L×R	mm	530	610	780	920	1020	1060	1180	1300	1360	1550	1710
地脚螺拴距离		前后F×B	mm	314	394	450	600	650	750	850	920	1010	1130	1110
电动级功率			KW	0.75	1.1	1.5	2.2	4	5.5	5.5	7.5	7.5	11	11
重量			Kg	400	576	1085	1780	2650	3540	4550	5500	7390	10800	12035